NP-6310 is a UPS module that can protect your PC and data in case of power loss, it adapt The UPS module is used for the uninterruptible power supply of your PC. In the event of a failure of the external supply, the module ensures that the application software can save important data. The module adopts super capacitor technology and intelligent power management technology, and can independently manage the startup and shutdown of the device. It can operate in a wide temperature ranging from -20 degrees Celsius to 60 degrees Celsius.

DC_IN
- Voltage:DC12V / DC24V
- Current:12A
- Protection:Overvoltage and power anti-reverse connection protection, EFT ±1500V,electrical surge DC2000V
DC_OUT
- Voltage:12V / 24V
- Current:9A
- Protection:Overcurrent
Electrical parameters
- Power In Idle:3W
- Maximum Power:60W/12V, 120W/24V
- Max. Charging current:3A
Supercapacitor
- Capacitance:1080 Ws
- Active life:The charge and discharge times are up to 500,000
Signal type
- Power:DI/DO dc-dc isolated power VCC, DC24V, 40mA.
- DC OK:Relay Normal Open output
- Bat.Mode:NPN output
- Bat.Ready:NPN output
- SW:NPN output
- Remote:NPN input
- Bat.Start:NPN input
- Dev.Psts:NPN input
Data interface
- Interface:DB9
- Mode:RS232 / RS485
- Protocol:Modbus RTU
- Parameters:Can be set via register 40003, default baud rate 115200bps,8-bit data bit,1-bit stop bit, no parity
- Modbus slave address:The address can be set via register 40004, default is 1
Physical
- Dimensions :180.0(mm) × 43.0(mm) × 125.2(mm)
- Weight:850(g)
Mounting
- Mount:Wall-Mounted or Din-Rail
Environment
- Work temperature:-20ºC ~ 60ºC (-4℉~140℉) with air flow (mSATA), 5~95% (Non-condensing)
- Storage Temperature:-40ºC ~ 80ºC (-40 ~ 176℉) with air flow (msATA), 5~95% (Non-condensing)
- Relative Humidity:5~95% (Non condensation)